|
|
|
Агрегаты бесперебойного питания,
Импульсные источники питания,
Источники электропитания,
Сетевые детали по спецификации заказчика
|
Працівники : |
30+ |
Рік заснування : |
1967 |
Рід діяльності : |
Manufacturer |
Oltronix була заснована в Швеції близько 40 років тому. У той час, коли велика кількість науково-технічного прогресу в розвитку харчування відбувалися, компанія придбала значний досвід виробництва в цій області. Завдяки своїм високим якістю і надійність, блоки живлення були в частому вживанні, стосовно до продукції інших виробників. Саме в цей момент спільно з Innotec-Netzgeräte почав. У 1994 Oltronix компаній Elektronik була заснована у Швейцарії і Німеччини, щоб продовжувати бізнес Oltronix. Ці компанії продовжують виробництво поставок Oltronix влади, а також розробила наступника продукції. Цілей нових продуктів більш високої продуктивності відносно до ціни, і більш широку функціональність, ніж раніше. Крім того, в останні стандарти, які повинні бути виконані нові технології і проекти були прийняті. Асортимент продукції був доповнений торгівлі виробів з високоякісних постачальників. У 1996 році компанії були реорганізовані і виробництво було сконцентровано на Rastatt, Німеччина. Паралельно з реорганізацією компанія була перейменована в Innotec-Netzgeräte GmbH. З гаслом: "Беручи новий шлях ... ' Innotec складу її зв'язок з Oltronix. Сьогодні Innotec-Netzgeräte представлена в різних європейських країнах і продає свою харчування по всій Європі. З переходом на новий, спеціально пристосовані місця виробництва в 1988 році, реорганізація компанії була завершена. Компанія працює з субпідрядниками для трансформаторів виробництва, механічну роботу і друкованих зборів. Тим не менше, остаточна зборка та випробування проводяться в site.Of курс компанії, клієнтську підтримку і сервіс пропонується для блоків харчування проводиться по колишня назва Oltronix Elektronik. З питань, що стосуються конкретних клієнтів живлення або наш стандартний асортимент продукції, використовуючи сторінку "партнерів
| DC-UPS power supplies These types of power supplies are used to hold the DC-output voltage at a stable level during a line failure for a limited time. These power supplies are used in industrial and safety applications. The safety of a system depends mainly on a safe supply. Even the best electronic system will not work if the line fails. Standard power supplies have hold-up times up to 20 ms for short line failures. Depending on the system safe operation times are from seconds |
| Linear controlled 19" plug-in power supplies For highest quality in control and lowest ripple the linear controlled power supplies type SMCP are the best choice.
To guarantee superb technical performance the transformer is located separately from the control electronics to prevent direct coupling of parasitics from the line to the control circuit. Only linear-controlled power supplies deliver output voltages with such a low ripple and high stability. These power supplies are mainly used in measurement applications. All outputs are equipped with sense lines to compensate the voltage loss on the output lines. The 5V outputs are equipped with an overvoltage protection circuit (OVP) to protect the load from overvoltage.
The supply voltage is a low AC voltage. Based on the application an external ring core transformer or a ferroresonant transformer can be used. A ferroresonant transformer reduces line disturbances up to 80 dB and compensates the voltage variations from the line. The power supplies are made to fit in a 19" rack with 3 units height.
Guarantee: This power supplies have a 2 year warranty.
Notice: For some of the power supplies are datasheets as pdf-files available. To start the download, please click the Type specification. | |
|
|