|
|
|
 |
Firma Gasmet Technologies rozwija i produkuje linię analizatorów gazu i systemów monitorowania Gasmet™. |
Rodzaj działalności : |
Manufacturer |
So Far So Good
So far we've only had English ads, so this will certainly increase the coverage. The CEE service so far has been good. Just how many leads it will ultimately provide us with of course remains to be seen. The ten languages are definitely a plus.
~ Gasmet ... Ilari Patrakka | |
Firma Gasmet Technologies rozwija i produkuje linię analizatorów gazu i systemów monitorowania Gasmet™.
Naszym celem jest dostarczanie naszym klientom innowacyjnych, opartych na potrzebach klienta rozwiązań do pomiaru i monitorowania gazu przemysłowego. Produkty Gasmet™ są niezawodne, przyjazne dla użytkownika i zapewniają konsekwentnie dokładne wyniki, wszystko to w bardzo konkurencyjnej cenie, posiadają certyfikat TÜV.
| Continuous Emissions Monitoring Systems The Gasmet™ CEMS is designed for continuous emissions monitoring measurements (CEM) and for continuous process monitoring. Measured components and calibration ranges can be changed according to application. Typical application areas include continuous emissions monitoring in Waste Incinerators and in Cement Kilns. The Gasmet™ CEMS can be easily configured for any new applications.
The Gasmet™ CEMS is used for on-line continuous measurements. It is an ideal tool to use for measuring trace concentrations of pollutants in wet, corrosive gas streams. All parts of the Gasmet™ CEMS can be heated up to 180 ºC. It can be used for undiluted gases and the sample gases do not need drying beforehand.
The Gasmet™ CEMS consists of Gasmet™ FTIR Gas Analyser, Gasmet™ PC and Gasmet™ Sampling System. As an option the system can be equipped with the Gasmet™ Oxygen analyser. Alternatively, the Gasmet™ FTIR gas analyzer can also be equipped with a TDL (Tunable Diode Laser) O2 - measurement module. All parts of the system are 19” rack mounted and are installed on pull-out shelves. The Gasmet™ CEMS includes all power connections and temperature controllers for heated lines and heated sample probe. The operation of the system is fully automatic and controlled by the Calcmet™ software. Additionally, all functions of the Gasmet™ CEMS can also be used manually.
Gasmet™ PC and Calcmet™ application software controls the CEMS. The measuring data can be transferred from the PC to the Control room with digital outputs or analog outputs. The alarms are transferred with relay contacts. The Gasmet™ CEMS provides comprehensive alarms and safety functions. If any of the critical alarms is activated, the zero gas starts to flow automatically into the sample cell to prevent condensation in the sample cell.
Gasmet™ CEMS is installed into air conditioned with a compressor-cooling unit or Vortex cooling. Additional features of the Gasmet™ CEMS include multipoint Sampling and automated Span Checks. Gasmet™ CEMS is also supported by full remote control via a modem.
The Gasmet™ CEMS have both TÜV and MCERTS approvals and they also meet requirements of the new European Standard Quality Assurance of Automated Measuring Systems (EN 14181). Gasmet™ CEMS can optionally also be supplied to Ex Zone I – specification.
| 
| gas analysers in-lab analysers , in-situ analysers, on-line analysers | |
|
|
358-9-7590 0400 
