|
|
|
Машини для пошиття взуття, Верстати для розкрою взуття,
Верстати для шкіровиробництва, Машини для виготовлення взуття |
Працівники : |
35 |
Рік заснування : |
1993 |
Рід діяльності : |
Manufacturer |
Сьогодні Лейброк розташований в самому "серці" Німецький взуттєвої промисловості в Пірмазенс є одним з останніх німецьких Традиція-компаній з виробництва інноваційних та високоякісних машини для взуттєвої промисловості "MADE IN GERMANY". Оскільки майже 40 років, Лейброк працює в дуже тісній співпраці всіх важливих взуття виробників і Лейброк машини - розробляє і виробляє сто відсотків "дім" в Pirmasens/Germany- дуже добре прийнятий у всьому світі, де взуття зроблено. Програма машин, що виробляються і поставляються Лейброк надзвичайно велика, від машин для виготовлення верху на машини для збирання взуття (Міцний і Bottoming) до обробки. Прості продуктів, а також комплекс машин високих технологій, наприклад, як висока продуктивність і автоматичної Roughers Cementers є частиною актуальну та цікаву програму з продажу. Крім виробництва машин в серіях, Лейброк завжди відкрита, щоб прослухати спеціальні вимоги його клієнтам, які потім могли б призвести до "замовною" машин, згідно специфікації індивідуальних клієнтів. Успіх Лейброк виробництвом, є Пірмазенс залежності від цілого ряду інструментів високих технологій з ЧПУ і з допомогою цього обладнання, висока точність і відмінна якість виробів, що випускаються і деталей може бути гарантована. Крім того, Лейброк справляє свій алюмінієвих ливарних, а також розділ для вулканізації гумових частин і форм. Лейброк, "Будинок Інновацій" для взуттєвих машин Крім того, вкрай сервіс-орієнтованої і завжди докладаємо всіх зусиль, щоб швидко реагувати і без бюрократії на запити клієнтів після нових машин, інструментів або зміни існуючих систем. Лейброк - партнер усьому світі взуттєвої промисловості в розробці і виробництві інноваційних та довговічної продукції!
| Backpart moulding machine model FFS 43 or FFS 43 K (K stands for cooling)
with look at collar to work on thermoplastic or lefa-backparts
With this machine that has some newnesses and some improvements highest quality is reached for either thermoplastic or lefa counters.
With - a compact pincer pull
- high pressure of the pressing pads
- wrinkle-free wiping-in in the area of the heel
- pecial pressing of the lasting margin
an optimal working result is achieved.
The length of the lasts is 80 mm, 90 mm, 155mm or 140 mm. This means that it is possible to work perfectly on gents, ladies, children shoes, as well as on security and heavy
walking shoes.
Serial equipment of the machine is:
- Activation unit for thermoplastic counters
- pneumatic time adjustment for all outer moulds
- pneumatic pressure regulation for outer moulds
- electronic heating control for outer moulds
- electronic heating control for inner moulds
- pneumatic time adjustment for outer moulds
- pneumatic pressure regulation for outer moulds
- cooling unit to work on themoplastic counters
- compact pincer pull
- maintenance unit
The machine can be equipped with:
- wipping in equpment for lasting margin
- special pressing for lasting margin
- height stop for lasting margin
- heated moulds for lefa counters
- Last can be heated or cooled
|
| Vamp moulding machine This machine is used to produce shoes which are, contrary to the usual way, not wiped over,
that means a connection to the insole will not become into existence. A premoulding of the vamps
is necessary to produce clogs or shoes made according to the “strobel-system”. This system means
that a textile insole will be stitched into the upper.
As leather is a natural product that differs in firmness, thickness and extensibility there will be
unevennesses by moulding that means the leather juts out of the last bottom area and gets wrinkles.
These facts cannot be accepted by the shoe-manufacturers.
| |
|
|