|
|
|
 |
Heesemann является одним из мировых ведущих производителей шлифовальных машин. |
| Сотрудники : |
50+ |
| Год основания : |
1933 |
Вид деятельности : |
Manufacturer |
В 1933 году, во время трудного экономического периода времени инженера Карла Heesemann основал компанию Heesemann. С самого начала он специализировался на производстве шлифовальной машины. Была разработана после Второй мировой войны автоматических шлифовальных станков для постоянно растущей мебельной промышленности. В этот период основные изобретения, которые были сделаны еще вехами в шлифовальной техники сегодня. Карл Heesemann ответственностью привело предприятие до преклонного возраста 93 лет, пока он не умер в феврале 2002 года. Руководство и все сотрудники чувствуют себя обязанными обеспечить роль компании на инновационный лидер в шлифовальной техники на будущее.
Milestones of the sanding technique
|
1952
First profile sanding machine
|
The PK 1, world wide the first running through profile sanding machine was the forerunner of the contemporary complex profile and edge sanding machines and installations
|
|
1956
Semi-automatic long belt sanding machine with pressure segment belt
|
The development of the pressure segment belt which for the first time, allowed a uniform sanding over the entire surface by means of a long belt is the base for all present cross sanding units and automatic long belt sanding machines.
|
|
1963
First cross sanding group
|
Thanks to the mechanical cross sanding with presanding against the fibre direction and the following finish sanding in fibre direction a surface quality has been achieved which had not been known before.
|
|
1981
First electronically controlled pressure beam
|
The further development of the special pressure beam including electronic pressure elements is the base`s for sanding machines with electronic pressure beam.
|
|
1987
CSD®-System with electro magnetic pressure elements
|
The innovative and world wide unique electromagnetic pressure beam system in all Heesemann surface sanding machines today is able to steplessly adjust the pressure force on each individual pressure element of the pressure beams. The result is a very adaptable pressure control especially in the edge area.
|
|
1997
CNC-Sanding centre
|
The sanding centre SZ 2 for the first time allows the processing of variably formed contours by means of belt sanding units.
|
| WORLD OF SANDING Anyone who has high expectations of their own product needs the best tool. The industrial sanding machines for wood and metal from Heesemann can be perfectly adapted to your needs thanks to a large selection of technically superior units. You define the requirements; we put together a machine that takes your production to a new level in terms of precision, process reliability and efficiency. | |
|
|
+49 5731 188 0
